Want more speed and hook up? This is the proven product to do the job. The special designed pump shoe creates a bigger opening, which reduces the cavitation and adds hook up on the Wave Blaster. Add the intake stuffer to the pump shoe and you have a combo that gains 2.5 Mph! Check the rules for racing but from our sources this product is legal in Sport Spec racing category. This product replaces the OEM pump shoe on your Yamaha Wave Blaster all years. Preparation of the your hull and using the correct adhesive is a must!
Making sure you have properly installed and you have let the adhesive dry is important to not void the warranty. We back all of ProWatercraft’s FLEX material product with a Lifetime Warranty.
Remove the intake grate, remove the oem pump shoe. Silicone the edges of the intake pump stuffer and shoe. Push the pump shoe into place, and then the stuffer can be siliconed into place. Clean / Wipe the edges and face of the products.
What You Need to Know:
- For the lifetime warranty, you need to install this product with ProWatercraft’s approved silicone. Apply silicone to all the edges and wipe off any excess from the surface of the product. Smooth out any excess silicone along the edges as well. Allow the silicone 24 hours to cure.
- The pump must be removed for installation
- Some aftermarket intake grates may decrease speed or performance. Modification or change of the intake grate may be necessary.
Frequently Asked Questions:
What is included with this product?
The intake stuffer and pump shoe combination comes as a single part. Silicone is not included. Use of any other type of silicone, adhesive, etc. besides ProWatercraft’s is not covered under warranty. You can get your own, or purchase some of ProWatercraft’s tested silicone for this product.